1. 縮量柱+倍量柱(前縮、后縮)

(REF(VOL,2)<REF(VOL,3) AND REF(VOL,1)<REF(VOL,2) AND (REF(CLOSE,1)>=REF(OPEN,2) OR

REF(CLOSE,1)>=REF(CLOSE,2) OR REF(CLOSE,2)>REF(OPEN,3)) AND VOL>=REF(VOL,1)*1.90 AND

REF(VOL,3)<VOL AND CLOSE>REF(CLOSE,1)) OR (REF(VOL,3)>=REF(VOL,4)*1.90 AND

REF(CLOSE,3)>=REF(CLOSE,4) AND (REF(VOL,2)<REF(VOL,3) OR REF(VOL,2)>REF(VOL,3)) AND

REF(CLOSE,2)>=REF(LOW,3) AND (RANGE(REF(VOL,1),REF(VOL,2),REF(VOL,3)) OR

REF(VOL,1)<REF(VOL,2)) AND REF(CLOSE,1)>=REF(LOW,3));

2. 高量柱+縮量柱

REF(VOL,3)=REF(HHV(VOL,N),3) AND REF(CLOSE,3)>=REF(CLOSE,4) AND

REF(VOL,2)<REF(VOL,3) AND REF(CLOSE,2)>=REF(LOW,3) AND REF(VOL,1)<REF(VOL,3) AND

REF(CLOSE,1)>=REF(LOW,3) AND VOL<REF(VOL,3) AND CLOSE>=REF(LOW,2); 

3. 平量柱+縮量柱

ABS(REF(VOL,3)-REF(VOL,4))/REF(VOL,4)<=0.05 AND (REF(CLOSE,3)>=REF(CLOSE,4) OR

REF(CLOSE,3)>=REF(OPEN,4)) AND REF(VOL,2)<REF(VOL,3) AND REF(CLOSE,2)>=REF(LOW,3) AND

REF(VOL,1)<=REF(VOL,3) AND REF(CLOSE,1)>=REF(LOW,3) AND VOL<=REF(VOL,1) AND

CLOSE>=REF(CLOSE,1);

4. 梯量柱+縮量柱

(ABS(REF(VOL,5)-REF(VOL,4))/REF(VOL,5)>0.05 OR REF(VOL,4)/REF(VOL,5)>=1.20) AND

REF(CLOSE,4)>=REF(CLOSE,5) AND REF(VOL,3)/REF(VOL,4)>=1.20 AND

REF(CLOSE,3)>=REF(CLOSE,4) AND REF(VOL,2)/REF(VOL,3)>=1.20 AND

REF(CLOSE,2)>=REF(CLOSE,3) AND REF(CLOSE,1)>=REF(LOW,2) AND CLOSE>=REF(LOW,2) AND

REF(VOL,2)>REF(VOL,1) AND (RANGE(VOL,REF(VOL,1),REF(VOL,2)) OR VOL<REF(VOL,1));

5. 倍量柱+梯量柱

(REF(VOL,4)>=REF(VOL,5)*2.0 AND REF(CLOSE,4)>=REF(CLOSE,5) AND REF(VOL,3)>=REF(VOL,4) AND

REF(CLOSE,3)<=REF(OPEN,3) AND REF(VOL,2)<REF(VOL,3) AND REF(CLOSE,2)>=REF(CLOSE,3) AND

RANGE(REF(VOL,1),REF(VOL,2),REF(VOL,3)) AND REF(CLOSE,1)>=REF(CLOSE,2) AND

VOL>REF(VOL,1) AND CLOSE>=REF(CLOSE,1)) OR (REF(VOL,3)>=REF(VOL,4)*2.0 AND

REF(CLOSE,3)>=REF(CLOSE,4) AND REF(VOL,2)<=REF(VOL,3) AND REF(CLOSE,2)>=REF(CLOSE,3) AND

REF(VOL,1)>REF(VOL,2) AND REF(CLOSE,1)>=REF(CLOSE,2) AND VOL>REF(VOL,1) AND

CLOSE>=REF(CLOSE,1));

6. 低量柱+梯量柱

REF(VOL,3)<=REF(MA(VOL,N),3) AND REF(VOL,2)>=REF(VOL,3) AND REF(CLOSE,2)>=REF(CLOSE,3) AND

(REF(VOL,1)>REF(VOL,2) OR RANGE(REF(VOL,1),REF(VOL,3),REF(VOL,2))) AND

REF(CLOSE,1)>=REF(LOW,2) AND VOL>REF(VOL,1) AND CLOSE>=REF(LOW,2);

7. 低量柱+倍量柱

REF(VOL,1)<=REF(MA(VOL,N),1) AND VOL>=REF(VOL,1)*1.90 AND CLOSE>=REF(CLOSE,1);

8. 倍量柱+倍量柱

REF(VOL,1)>=REF(VOL,2)*1.90 AND VOL>=REF(VOL,1)*1.90 AND

(CLOSE-MA(CLOSE,60))/MA(CLOSE,60)<=0.25;

9. 陽縮倍柱

REF(VOL,1)>=VOL*2.0 AND CLOSE>=OPEN AND CLOSE>=REF(CLOSE,1);

10. 低量柱(13種)

(REF(VOL,2)=REF(LLV(VOL,N),2) AND REF(VOL,1)=REF(LLV(VOL,N),1) AND VOL=LLV(VOL,N)) OR

(REF(VOL,6)=REF(LLV(VOL,N),6) AND REF(VOL,3)=REF(LLV(VOL,N),3) AND VOL=LLV(VOL,N)) OR

(REF(VOL,4)=REF(LLV(VOL,N),4) AND REF(VOL,2)=REF(LLV(VOL,N),2) AND VOL=LLV(VOL,N)) OR

(REF(VOL,3)=REF(LLV(VOL,N),3) AND REF(VOL,2)=REF(LLV(VOL,N),2) AND VOL=LLV(VOL,N)) OR

(REF(VOL,3)=REF(LLV(VOL,N),3) AND REF(VOL,1)=REF(LLV(VOL,N),1) AND VOL=LLV(VOL,N)) OR

(REF(VOL,5)=REF(LLV(VOL,N),5) AND REF(VOL,1)=REF(LLV(VOL,N),1) AND VOL=LLV(VOL,N)) OR

(REF(VOL,5)=REF(LLV(VOL,N),5) AND REF(VOL,4)=REF(LLV(VOL,N),4) AND VOL=LLV(VOL,N)) OR

(REF(VOL,4)=REF(LLV(VOL,N),4) AND REF(VOL,3)=REF(LLV(VOL,N),3) AND VOL=LLV(VOL,N)) OR

(REF(VOL,4)=REF(LLV(VOL,N),4) AND REF(VOL,1)=REF(LLV(VOL,N),1) AND VOL=LLV(VOL,N)) OR

(REF(VOL,5)=REF(LLV(VOL,N),5) AND REF(VOL,3)=REF(LLV(VOL,N),3) AND VOL=LLV(VOL,N)) OR

(REF(VOL,5)=REF(LLV(VOL,N),5) AND REF(VOL,2)=REF(LLV(VOL,N),2) AND VOL=LLV(VOL,N));